Food mixers are commonly serviced

Commercial seat type multifunctional Food Mixer is mainly composed of Motor, touch switch, grinding box, base and shell. As the core component of food mixer, motor is mainly composed of stator, electric plate, brush device and front and rear end covers. Its stator windings are connected in series with armature windings through brush reversal, so stand mixer has the advantages of small volume, high speed, large starting torque and adjustable speed.

When in use, switch on the power supply, the motor is in a state of high-speed operation, when the motor temperature rises abnormally, the thermal fuse will be fused, cut off the power supply, protect the motor from being burned.
Fault phenomenon: start, the motor does not rotate

Cause:
1, power failure or power supply fuse blown;
2, the power plug is not inserted, or the power cord is disconnected;
3, the switch contact is poor;
4, desktop mixer cover is not put right cover, safety switch out of contact, circuit no electricity;
5, bearing lack of oil, turn embroidery dead, belt loose or slip;
6. Motor stator is damaged or burned;
7. The overheating protection switch is in open circuit or damaged

Solution:
1, with normal power supply use, replace the appropriate fuse;
2, plug in the power plug, reconnect or replace the power cord;
3. Return to the factory for maintenance;
4, cover the cover, so that the safety switch normal contact;
5, remove rust, oil, replace the belt;
6. Return to the factory for maintenance;
7, with the motor cooling before use, or return to the factory for maintenance
Fault phenomenon: the motor has high heat

Cause:
1, stirred food is too much or too thick, heavy load;
2, the voltage is too high;
3. Overload and timeout;
4. Long running time;
5, bearing oil shortage;
6, motor local short circuit

Solution:
1, appropriate reduction, dilution of food or pay attention to avoid solid food;
2, with normal voltage to use;
3, according to the specification of the weight of use;
4. Control running time not exceeding 20 minutes;
5, appropriate oil injection;
6. Return to the factory for maintenance
Food Mixer Manufacture